- Galvenā
- Jaunākie produkti
- Solar Panel FOSSIBOT SP200 Pro Solar Panel FOSSIBOT SP200 Pro
Solar Panel FOSSIBOT SP200 Pro
- Apraksts
- Piegāde un atgriešana
- Garantija
- Atsauksmes
FOSSIBOT SP200 Pro Solar Panel
The FOSSiBOT SP200 Pro is a foldable, bifacial solar panel with a maximum power output of 200 W, designed for charging portable power stations. It uses bifacial technology, which allows it to absorb light from both sides, providing up to 10–15% more light than a single-sided design. Monocrystalline cells with a declared conversion efficiency of up to 25% enable efficient use of solar radiation. The panel features an aluminum frame, reinforced corners, bypass diodes, and MC4 connectors. The IP67 rating enhances resistance to water and dust, while the foldable design and weight of 6.5 kg make it easy to transport. The SP200 Pro is ideal for camping, RV travel, fishing, and as part of a home emergency power system.
Bifacial design—up to 10–15% more light
Bifacial technology allows the panel to capture sunlight from both sides. The front surface absorbs direct sunlight, while the back captures rays reflected from the ground. Under favorable conditions, this allows for up to 10–15% more light to be harnessed than with single-sided panels. This solution is particularly useful when the panel is positioned on light-colored surfaces that reflect sunlight well. The additional light reaching the cells can increase the amount of energy generated.
200 W Power Output and High Conversion Efficiency
The panel offers a maximum power output of 200 W under standard test conditions (STC). The monocrystalline cells used feature a declared conversion efficiency of up to 25%, which allows for the efficient conversion of sunlight into electricity. Under typical weather conditions, the panel’s actual power output is approximately 70–85% of the maximum value, or about 140–170 W. The final result depends, among other factors, on sunlight intensity, temperature, panel orientation, and any shading.
Aluminum Frame and Reinforced Corners
The SP200 Pro features an aluminum frame that stiffens the structure and provides additional edge protection. Thick plastic corner guards help reduce the risk of mechanical damage. This combination increases the panel’s durability, which is important during regular outdoor use, especially while camping and traveling.
Stable 35° Angle
Integrated supports allow the panel to be set at a fixed 35° angle without the need for manual tilt adjustment. This design allows you to conveniently set it up on a suitable surface, such as grass or dirt. The proper angle helps maximize solar radiation, although actual charging efficiency also depends on the sun’s position and the panel’s orientation.
Foldable design – convenient transport and storage
The panel consists of four interconnected segments that, when unfolded, form a surface measuring 2080 × 602 × 21.4 mm. When folded, its dimensions are reduced to 602 × 520 × 87.4 mm, making it easy to store in a car trunk, RV, or storage compartment. The design features carrying handles, and the included carrying bag ensures convenient storage. Its compact size when folded allows you to take the panel on a trip without having to set aside a lot of space for the equipment.
Bypass LEDs – Less Power Loss During Partial Shading
When using the panel outdoors, parts of its surface may be obscured by leaves, branches, or dirt. The bypass diodes help minimize power losses caused by partial shading of the cells and reduce the risk of localized overheating. As a result, the panel can operate more efficiently under conditions of uneven sunlight, although shading still affects the amount of energy generated.
IP67 Protection Rating – Water and Dust Resistance
The FOSSiBOT SP200 Pro has a declared IP67 protection rating, which means it is dust-tight and resistant to brief immersion in water in accordance with the requirements of this class. The panel is therefore suitable for use in varying weather conditions, including rain. Its operating temperature range of −10 °C to 70 °C allows it to be used throughout the year. However, when operating outdoors, the electrical connections must be protected in accordance with the manufacturer’s recommendations.
MC4 Connectors and System Expandability
Standard MC4 connectors allow the panel to work with compatible power stations and solar systems. The kit includes a 1.5-meter MC4–XT60 cable, which allows you to connect the panel to a power station equipped with a compatible solar charging input. The SP200 Pro is compatible with, among others, the FOSSiBOT F1800, F2400, F3600 Pro, and F7200 charging stations. It is also possible to connect several panels in series or in parallel, which allows you to increase the voltage or current depending on the selected configuration. This enables you to tailor the set to your energy needs and the input parameters of the power station. Before connecting multiple panels, check the permissible voltage, current, and input power of the device you are connecting.
Solar Power on the Go and During Power Outages
The foldable FOSSiBOT SP200 Pro panel is ideal for use wherever access to a traditional electrical outlet is limited. While camping, traveling in an RV, or fishing, it allows you to charge a portable power station, which you can then use to power phones, laptops, camping lights, and other devices. It can also be part of a home emergency kit, allowing you to recharge the power station during power outages. It’s a way to harness solar energy both while traveling and in situations requiring an additional power source.
Included
- FOSSiBOT SP200 Pro 200 W photovoltaic panel
- Carrying bag
- MC4–XT60 solar charging cable (1.5 m)
- User manual
| Manufacturer | FOSSiBOT |
|---|---|
| Model | SP200 Pro |
| Type | folding solar panel |
| Cell type | monocrystalline |
| Technology | bifacial |
| Maximum power (STC) | 200 W |
| Declared conversion efficiency | up to 25% |
| Maximum power voltage (Vmp) | 18.8 V |
| Maximum power current (Imp) | 10.7 A |
| Open-circuit voltage (Voc) | 22.6 V |
| Short-circuit current (Isc) | 10.9 A |
| Connectors | MC4 |
| Number of segments | 4 |
| Tilt angle | 35° |
| Frame material | aluminum |
| Protection rating | IP67 |
| Operating temperature | −10 °C to 70 °C |
| Dimensions when unfolded | 2080 × 602 × 21.4 mm |
| Dimensions when folded | 602 × 520 × 87.4 mm |
| Weight | 6.5 kg |
Piegādes noteikumi un nosacījumi
-
Bezmaksas piegāde
Mēs piegādājam visus pasūtījumus pilnīgi bez maksas 3–5 darba dienu laikā. -
Piegādes laiks
Pasūtījumu apstrāde un nosūtīšana aizņem līdz 1 darba dienai, un piegāde aizņem 3–5 darba dienas.
Lūdzu, ņemiet vērā, ka piegādes laiki var nedaudz atšķirties ārēju faktoru, piemēram, svētku dienu vai loģistikas traucējumu, dēļ. -
Piegādes metodes
Preces tiek piegādātas tieši uz jūsu norādīto adresi ar kurjeru vai uz pakomātu, ja izvēlaties šo iespēju.
Atgriešanās
- Bezmaksas atgriešana 14 dienu laikā
Ja prece Jums neder, Jūs to varat atgriezt 14 kalendāro dienu laikā no saņemšanas datuma, pilnīgi bez maksas. - Atgrieztajām precēm jābūt to oriģinālajā iepakojumā un nebojātām.
- Lai iegūtu plašāku informāciju par preču atgriešanu, lūdzu, skatiet mūsu preču atgriešanas un atmaksas politiku .
Kontakti
Ja jums ir kādi jautājumi par piegādi vai preču atgriešanu, lūdzu, sazinieties ar:
E-pasts: info@veno.lv
24 mēnešu garantija
Mūsu apņemšanās pret jums ir kvalitāte un uzticamība.
Iegādājoties viedelektroniku vietnē veno.lt , jūs saņemat ne tikai vismodernākos un uzticamākos produktus, bet arī 24 mēnešu garantiju, kas nodrošina jūsu sirdsmieru un pārliecību par mūsu produktiem.
Ko sedz 24 mēnešu garantija?
- Visām elektroniskajām precēm, kas iegādātas vietnē veno.lt, ir 24 mēnešu garantija no iegādes datuma.
- Garantija attiecas uz ražošanas defektiem un bojājumiem, kas nav radušies nepareizas lietošanas vai mehānisku bojājumu dēļ.
- Garantijas periods ir spēkā tikai ar iesniegto pirkuma dokumentu (rēķinu, čeku).
Kā izmantot garantiju?
-
Ja jūsu ierīcei ir kādi darbības traucējumi vai tā nedarbojas pareizi, lūdzu, sazinieties ar mūsu klientu apkalpošanas nodaļu:
- E-pasts: info@veno.lt
- E-pasts: info@veno.lt
-
Aprakstiet problēmu un iesniedziet pirkuma dokumentu.
-
Pēc jūsu pieprasījuma saņemšanas mēs sniegsim tālākus norādījumus par preces atgriešanu vai remontu.
-
Garantijas pakalpojums var ietvert bezmaksas remontu, detaļas nomaiņu vai produkta nomaiņu atkarībā no kļūmes veida.
Kas nav iekļauts garantijā?
- Mehāniski bojājumi, kas radušies nepareizas lietošanas vai negadījumu rezultātā.
- Bojājumi, kas radušies šķidrumu iedarbības, pārslodzes vai neatļautu izmaiņu rezultātā.
- Dabisks nodilums un lietošanas pazīmes.
Kāpēc ir vērts izvēlēties veno.lt?
Mēs ne tikai pārdodam kvalitatīvu elektroniku, bet arī garantējam, ka jūsu pirkums būs drošs un uzticams. Mūsu 24 mēnešu garantija ir mūsu apņemšanās sniegt jums vislabāko apkalpošanu un tehnisko atbalstu.
Ja jums ir vēl kādi jautājumi par garantiju, lūdzu, sazinieties ar mūsu klientu apkalpošanas dienestu. Mēs vienmēr esam gatavi jums palīdzēt!
veno.lt – viedākie elektronikas produkti jums ar garantiju!
Bezmaksas piegāde
Visiem pasūtījumiem
24 mēnešu garantija
Visaptveroša garantija
Droši maksājumi
Drošs maksājums
Tiešraides atbalsts visu diennakti
Vienmēr gatavs palīdzēt








Arī citi bija ieinteresēti